The XR8 Pro G2SE is the next development in a series of 1/8 ESCs with 5 category profiles . An efficient thermal regulation system ensures perfect heat dissipation, thanks to the strong airflow on the sides of the fan and the copper heat sink inside. The XR8 G2S is optimally protected.
The XR8 Pro SE supports boost and turbo timing up to 48 °, which is important in competitions.
Designed for use with 2 to 4S LiPo batteries, the ultra-soft cable type is made of 11AWG cables , the specially designed solder connectors and the elegant appearance are examples of high-quality manufacturing. In terms of functionality, the XR8 G2SE shines with a BEC of 6 to 8.4 V in 0.1 steps. The capacitor also provides security and protection. If the XR8 Plus ESC is linked to the Hobbywing app, the collected data can not only be evaluated, but also viewed live.
- CNC aluminum case for better cooling
- 30 different adjustment parameters
- Support for Full Sensored mode (when used with a suitable HOBBYWING motor)
- BEC with max.15A and 6-8.4V for using various servos
- Internal protection against poor battery connection
- Thermal protection of capacitors to prevent explosions
- Simplest programming possible without cables the OTA programmer as well as a smartphone
- Special for 1/8 buggy, truggy, competition track cars
- Sensored and sensorless motor compatible
- 200A continuous power
- Peak power 1080A
- 2 to 4S Lipo power supply
- Dynamic timing
- BEC 6v/8.4v 6A, max 15A
- Dimensions 56.1(L) x 42.1(W) x 38.5(H) mm
- Weight: 120gr
- The G3 version allows more efficient ventilation than the G2 version
- Full-sensored Mode. The first motor with a chip that allows the variator to identify it.
- If you use it with a Xerun XR8/XR8 Plus drive you will be able to take advantage of Full-sensored mode and benefit from better performance as well as more flexibility.
- Turbo Timing Technology. If used with a Xerun XR8 variatuer you can activate the turbo timing function and thus boost engine performance.
- Bi-directional Adjustable Timing. Bidirectional (CW and CCW) mechanical adjustment of motor timing to optimize performance according to your use.
- Advanced Hall Sensing System. In Full-Sensored mode the sensor knows the exact position of the motor, and protects the system from interference.
- ow Cogging Torque. First motor to adopt a 4 pole 8 magnet rotor (staggered pole), allows very low cogging to be obtained (85% reduction compared to a standard motor).
- CNC machined aluminum engine cage
- Sensor with silicone seal.
- New Gold U-shaped connector.
- Japanese NMB bearings
- High density glue 340°C
Hobbywing Xerun 4268SD G2 - Dimensions:
- 5mm motor shaft
- Length 67.8mm
- Axle length 18.5mm
- Diameter 42mm
- Weight 315gr
