You are looking for a high-performance device built to last. When you hit the trails, you want to do so with confidence and the answer is the all-new Element Builder Kit!
The revolutionary Stealth® X gearbox is at the heart of the Enduro. Although the exterior appears to have a conventional 3-speed transmission look, the interior is far from conventional. The Stealth® X offers the ability to adjust the rear gear ratio independently of the front gear in three levels. Option 1 overcovers the front axle by 5.7% and option 2 overcovers the front axle by 11.83%.
The tires are powered by 3-piece telescopic gimbals with an aluminum center section , as well as a hardened steel gearbox. For the build kit we include machined steel versions of the 5.7% and 11.83% transmission gears. For Stealth® X transmission.
We moved the tie rod assembly from the usual location to the rear of the axle (BTA). This feature significantly improves the deck crossing angle , making rough terrain much easier to manage.
Knowing that each build is different, we have given you the opportunity to choose the wheelbase length that suits most bodies on the market. Included optional rear linkages allow builders to choose from 313mm, 305mm and 299mm wheelbases.
- New front and rear shock absorber mounts “GKS System”
- New adjustments for shock absorber angles, droop, ground clearance, spring preload, etc.
- New Bronze-colored FT shock absorbers
- New revolutionary Stealth X transmission that allows you to change your ratios simply
- New Overdrive possibility
- Steering behind on axle (BTA)
- Aluminum steering plates
- Integrated winch mount
- Threaded aluminum shock body
- CMS (Chassis Mounted Servo)
- Stamped steel chassis rails
- Water-resistant waterproof receiver box
- Wheel hexagon 12mm
- Adjustable front and rear bumper supports
- Two battery boxes: one standard and one shorty
- Aluminum engine mount
- Adjustable rear shock mounting positions
- Front and rear telescopic driveshafts
- Extruded aluminum driveshaft splines
- One-piece rear axle
- Machined input gear
- Metal crown
- Machined steel upper shaft
- Metal ball bearings included
- Length: 462mm
- Width: 236mm
- Wheelbase: 313 / 305 / 299mm
- Element Mounting Kit
- Installation instructions
- Electric motor size 540
- Electronic variator
- 48dp motor pinion (18 teeth recommended)
- LiPo 7.4V - 11.1V with "shorty" or "standard" battery dimensions
- Battery charger (for the chosen battery type)
- Radio + Receiver
- Steering servo
- Bodywork + Painting
- Wheels with 12mm hexagonal fixing
